Quarter Sawn Teak Decking Strip, 1/2 x 4 in x 48 in, KD 10%

Dimensions

Each Teak Board

• Thickness: 1/2 in

• Width: 4 in

• Length: 48 in / 4 ft

• Face Coverage: Approx. 1.33 sq ft

• Wood Volume: Approx. 0.67 board ft

• Quantity: 1 strip unless a multipack quantity is selected

Bullet Points

• Genuine Teak Decking Wood: Solid teak strip intended for yacht decking, boat restoration, cockpit flooring, marine trim, and custom woodworking.

• Quarter-Sawn Grain Orientation: Quarter-sawn selection provides a straighter, more uniform grain appearance desirable for visible marine applications.

• Kiln-Dried to Approximately 10%: Moisture-controlled teak supports improved dimensional consistency during machining, fitting, and installation.

• Substantial 1/2-Inch Thickness: Provides sufficient material for sanding, shaping, refinishing, and custom deck fabrication.

• Wide Four-Inch Profile: Suitable for deck margins, borders, king planks, hatch surrounds, thresholds, furniture components, and wider decking layouts.

• Four-Foot Project Length: The 48-inch board is practical for repairs, smaller deck sections, marine joinery, and custom woodworking projects.

• Naturally Suited to Marine Use: Teak’s dense grain and naturally occurring oils make it a traditional material for boats and moisture-exposed environments.

• Ready for Custom Fabrication: Can be cut, routed, drilled, sanded, shaped, bonded, fastened, or finished according to project requirements.

Detailed Product Description

Create yacht decking, boat components, and premium woodworking projects with this genuine quarter-sawn teak decking strip. The board measures 1/2 inch thick × 4 inches wide × 48 inches long, providing approximately four linear feet, 1.33 square feet of face coverage, and 0.67 board feet of solid teak.

The broad four-inch profile is particularly useful for deck margins, king planks, borders, hatch surrounds, companionway thresholds, cockpit components, marine furniture, cabinetry, and architectural woodworking. Its substantial half-inch thickness allows material for final sanding, surface preparation, fitting, and future refinishing.

The teak is kiln dried to approximately 10% moisture content to support dimensional consistency during storage, machining, and installation. Quarter-sawn grain orientation produces a straighter and more linear appearance than typical flat-sawn lumber, making it suitable for visible marine and decorative applications.

Freshly machined teak generally displays warm golden-brown tones with natural variation in color and grain. When exposed outdoors without a protective finish, the surface may gradually weather to a silver-gray patina.

The board may be cut, routed, drilled, sanded, shaped, bonded, fastened, sealed, or finished according to the intended application. Because teak naturally contains oils, use surface-preparation methods, adhesives, sealants, primers, and finishes specifically recommended for teak or other oily hardwoods.

Natural wood variation should be expected. Grain direction, color, mineral markings, and texture may differ slightly from one strip to another. Allow additional material for trimming, cutting losses, grain matching, seam spacing, and installation requirements.

Product Specifications

• Product Type: Teak decking strip

• Material: Genuine solid teak

• Grain Orientation: Quarter sawn

• Drying Method: Kiln dried

• Moisture Content: Approximately 10%

• Quantity: 1 piece

• Thickness: 1/2 in

• Width: 4 in

• Length: 48 in / 4 ft

• Linear Length: 4 ft

• Approximate Face Coverage: 1.33 sq ft

• Approximate Wood Volume: 0.67 board ft

• Recommended Uses: Yacht decking, boat restoration, cockpit flooring, deck margins, hatch surrounds, marine trim, furniture, cabinetry, and custom woodworking

Package Contents

• 1 × Quarter-Sawn Kiln-Dried Teak Decking Strip