Marine Grade Teak Decking Strips, 1/2 x 4 x 48 Inch, Quarter Sawn

Dimensions (inches)

• Thickness: 0.5 in

• Width: 4 in

• Length: 48 in

• Size per Strip: 1/2 × 4 × 48 inches

• Coverage per Strip: 1.33 sq ft

• Volume per Strip: 0.67 board ft

Bullet Points

• Marine Grade Teak Wood: Suitable for yacht decks, boat interiors, exterior trim, restoration work, custom joinery, and other marine woodworking applications.

• Quarter-Sawn Grain: Quarter-sawn orientation provides a straight, refined grain appearance commonly preferred for premium decking and decorative woodwork.

• True Project Size: Each teak strip measures 1/2 inch thick, 4 inches wide, and 48 inches long for predictable cutting, planning, and installation.

• Natural Weather Resistance: Teak contains naturally occurring oils that help it perform well in humid, wet, and changing outdoor conditions.

• Versatile Woodworking Stock: Can be used for yacht decking, boat flooring, cockpit trim, swim platforms, thresholds, edging, furniture, and architectural details.

• Smooth Workable Surface: Suitable for cutting, routing, sanding, bonding, fastening, shaping, and finishing according to project requirements.

• Natural Teak Appearance: Warm golden-brown coloration and individual grain variations give every strip distinctive natural character.

• For Professional and DIY Projects: Appropriate for marine contractors, boat builders, restoration specialists, cabinetmakers, carpenters, and experienced woodworkers.

Detailed Product Description

Create refined marine and architectural woodwork with this Marine Grade Quarter-Sawn Teak Decking Strip, supplied in a practical 1/2 × 4 × 48-inch format.

The strip is cut with a quarter-sawn grain orientation, producing a straighter and more consistent visual pattern than typical flat-sawn lumber. This makes it especially suitable for visible decking, trim, edging, furniture components, and restoration projects where grain appearance is important.

Teak is widely selected for marine applications because its naturally occurring oils help the wood tolerate moisture, humidity, and changing environmental conditions. The material can be used for yacht decking, boat flooring, cockpit surfaces, swim-platform details, cabin trim, thresholds, rails, decorative joinery, and custom woodworking.

Each strip provides approximately 1.33 square feet of face coverage and contains approximately 0.67 board feet of wood. The 4-foot length is convenient for smaller decking sections, repairs, prototypes, samples, trim work, and detailed custom fabrication.

The wood may be cut, routed, drilled, sanded, bonded, fastened, or finished according to the requirements of the project. Because teak contains natural oils, surface preparation and adhesives should be selected specifically for oily hardwoods.

Natural variations in grain direction, color, mineral streaking, and tone are expected in genuine wood. Freshly worked teak may display lighter golden tones that can gradually deepen or weather depending on exposure and the finish applied.

Product Specifications

• Product Type: Teak decking strip

• Wood Type: Teak

• Grade Description: Marine grade

• Grain Orientation: Quarter sawn

• Thickness: 1/2 inch

• Width: 4 inches

• Length: 48 inches

• Face Coverage: Approximately 1.33 sq ft per strip

• Wood Volume: Approximately 0.67 board ft per strip

• Recommended Applications: Yacht decking, boat flooring, marine trim, restoration, furniture, joinery, edging, and architectural woodworking

• Surface Use: Indoor and outdoor project applications

• Color: Natural golden-brown teak tones

Package Contents

• Quantity selected of 1/2 × 4 × 48-inch teak decking strips