KD FEQ Marine Grade Teak Decking, 17 Pack, 9 x 45 mm x 7 ft

Dimensions (inches)

Each Strip

• Thickness: 0.35 in (9 mm)

• Width: 1.77 in (45 mm)

• Length: 84 in (7 ft)

Complete Bundle

• Quantity: 17 strips

• Total Linear Length: 119 ft

• Total Face Coverage: Approx. 17.57 sq ft

• Total Wood Volume: Approx. 6.23 board ft

Bullet Points

• 17-Piece Teak Decking Bundle: Includes seventeen full-length strips measuring 9 mm thick, 45 mm wide, and 7 feet long for yacht decking and marine woodworking.

• Kiln-Dried Teak Stock: KD moisture-controlled material supports improved dimensional consistency during machining, fitting, bonding, and installation.

• FEQ Marine Grade Selection: Selected teak provides a refined appearance for visible boat decks, cockpit flooring, swim platforms, and restoration projects.

• Mixed Vertical-Grain Character: VG Mix combines vertical and near-vertical grain patterns with the natural tonal variation of genuine teak.

• Versatile 45 mm Profile: The approximately 1.77-inch width suits deck planks, caulked layouts, borders, hatch surrounds, thresholds, and cabin trim.

• Full Seven-Foot Lengths: Long 84-inch strips reduce unnecessary joints while remaining manageable during transportation, cutting, and placement.

• Naturally Suited to Marine Use: Teak’s dense grain and naturally occurring oils support its traditional use in humid and moisture-exposed environments.

• Custom Woodworking Material: Suitable for sawing, routing, drilling, sanding, shaping, bonding, fastening, and finishing according to project requirements.

Detailed Product Description

Complete yacht decking, boat restoration, and custom marine woodworking projects with this 17-piece bundle of kiln-dried FEQ marine-grade teak decking strips.

Each strip measures 9 mm thick × 45 mm wide × 7 feet long, equivalent to approximately 0.35 × 1.77 × 84 inches. The complete bundle supplies approximately 119 linear feet, 17.57 square feet of face coverage, and 6.23 board feet of teak material.

The 45 mm-wide profile offers a practical balance between narrow traditional decking battens and broader deck planks. It is suitable for yacht decks, cockpit flooring, swim platforms, hatch surrounds, deck borders, thresholds, cabin trim, restoration sections, furniture components, and architectural joinery.

The teak is kiln dried to help regulate moisture content and support dimensional consistency before fabrication. Its FEQ marine-grade selection is intended for visible applications where grain appearance, natural color, and material quality are important.

The VG Mix designation describes a combination of vertical and near-vertical grain characteristics. Natural variations in golden-brown color, grain direction, texture, and mineral markings remain visible and contribute to the authentic character of genuine teak.

Seven-foot lengths help reduce the number of joints required across continuous deck runs while remaining convenient for handling and fabrication. The strips may be resized or machined to suit custom marine decking patterns and trim applications.

Teak is widely selected for marine woodworking because of its dense structure and naturally occurring oils. Freshly worked teak generally displays warm golden-brown tones. When left unfinished outdoors, the surface may gradually develop a silver-gray patina.

The strips can be cut, routed, drilled, sanded, shaped, bonded, fastened, or finished according to the intended application. Because teak naturally contains oils, use preparation methods, adhesives, primers, sealants, and finishes specifically recommended for teak or other oily hardwoods.

Allow additional material for trimming, seam spacing, grain matching, cutting losses, installation patterns, and future repairs.

Product Specifications

• Product Type: Marine teak decking strips

• Wood Type: Genuine teak

• Quantity: 17 pieces

• Grade Description: FEQ marine grade

• Grain Selection: VG Mix

• Drying Method: Kiln dried

• Thickness: 0.35 in / 9 mm

• Width: 1.77 in / 45 mm

• Length: 84 in / 7 ft

• Total Linear Length: 119 ft

• Total Face Coverage: Approx. 17.57 sq ft

• Total Wood Volume: Approx. 6.23 board ft

• Recommended Applications: Yacht decking, boat flooring, cockpit decking, swim platforms, hatch surrounds, deck restoration, cabin trim, furniture, and marine joinery

Package Contents

• 17 × KD FEQ Marine-Grade Teak Decking Strips