KD FEQ Marine Grade Teak Decking, 16 Pack, 15 x 38 mm x 6 ft

Dimensions (inches)

Each Strip

• Thickness: 0.59 in (15 mm)

• Width: 1.50 in (38 mm)

• Length: 72 in (6 ft)

Complete Bundle

• Quantity: 16 strips

• Total Linear Length: 96 ft

• Total Face Coverage: Approx. 11.97 sq ft

• Total Wood Volume: Approx. 7.07 board ft

Bullet Points

• 16-Piece Teak Decking Bundle: Includes sixteen genuine teak strips measuring 15 mm thick, 38 mm wide, and 6 feet long.

• Substantial 15 mm Thickness: The approximately 0.59-inch profile provides additional material for machining, refinishing, marine repairs, and durable deck installations.

• FEQ Marine Grade Selection: Selected teak offers a refined natural appearance for yacht decks, cockpit flooring, swim platforms, and boat restoration.

• Kiln-Dried Teak: KD moisture-controlled material supports improved dimensional consistency during cutting, fitting, bonding, and installation.

• VG Mix Grain Character: Mixed vertical and near-vertical grain patterns provide an attractive linear appearance with authentic natural variation.

• Traditional 38 mm Width: The approximately 1.5-inch profile suits caulked yacht-deck layouts, borders, hatch surrounds, cabin trim, and cockpit surfaces.

• Six-Foot Project Lengths: Full 72-inch strips are practical for smaller deck sections, restoration work, swim platforms, and custom marine joinery.

• Versatile Hardwood Stock: Suitable for cutting, routing, drilling, sanding, shaping, bonding, fastening, and finishing according to project requirements.

Detailed Product Description

Complete yacht decking, boat restoration, and custom marine woodworking projects with this 16-piece bundle of genuine kiln-dried FEQ marine-grade teak decking strips.

Each strip measures 15 mm thick × 38 mm wide × 6 feet long, equivalent to approximately 0.59 × 1.50 × 72 inches. The complete bundle supplies approximately 96 linear feet, 11.97 square feet of face coverage, and 7.07 board feet of genuine teak material.

The substantial 15 mm thickness provides useful material for demanding marine applications and allows greater flexibility for surface preparation, final sanding, refinishing, and custom machining. The traditional 38 mm width is well suited to narrow-plank yacht-deck patterns with defined caulk seams.

These strips can be used for yacht decks, cockpit flooring, swim platforms, hatch surrounds, deck borders, thresholds, cabin trim, restoration sections, marine furniture, and architectural joinery. Six-foot lengths offer practical continuous coverage while remaining manageable during transport, fabrication, positioning, and installation.

The teak is kiln dried to help regulate moisture content and improve dimensional consistency before fabrication. Its FEQ marine-grade selection is intended for visible applications where grain appearance, natural coloration, and material presentation are important.

The VG Mix designation describes a combination of vertical and near-vertical grain characteristics. Natural variations in golden-brown tone, grain direction, mineral markings, and texture remain visible and contribute to the individual character of genuine teak.

Teak is traditionally selected for marine woodworking because of its dense grain structure and naturally occurring oils. Freshly machined teak typically displays warm golden-brown tones. When left unfinished outdoors, it may gradually develop a natural silver-gray patina.

The strips may be cut, routed, drilled, sanded, shaped, bonded, fastened, or finished according to the intended project. Because teak naturally contains oils, use surface-preparation methods, adhesives, primers, sealants, and coatings specifically recommended for teak or other oily hardwoods.

Allow additional material for trimming, seam spacing, grain matching, cutting losses, installation patterns, and future repairs.

Product Specifications

• Product Type: Marine teak decking strips

• Wood Type: Genuine teak

• Quantity: 16 pieces

• Grade Description: FEQ marine grade

• Grain Selection: VG Mix

• Drying Method: Kiln dried

• Thickness: 0.59 in / 15 mm

• Width: 1.50 in / 38 mm

• Length: 72 in / 6 ft

• Total Linear Length: 96 ft

• Total Face Coverage: Approx. 11.97 sq ft

• Total Wood Volume: Approx. 7.07 board ft

• Recommended Applications: Yacht decking, boat flooring, cockpit decking, swim platforms, hatch surrounds, deck restoration, cabin trim, furniture, and marine joinery

Package Contents

• 16 × KD FEQ VG Mix Genuine Marine-Grade Teak Decking Strips